Setup
6.If this is the first time you are using the function, it will ask you to allow or deny remote control of the product. Select Allow.
7.Follow the instructions that came with the application to control the product.
Support
Software Upgrade
The Software Upgrade menu allows you to upgrade the product’s software for performance improvements or additional services. You can upgrade in four ways:
•By Internet
•By USB
•By Disc
•By Downloaded (File)
The four methods are explained below.
By Internet
To upgrade by Internet, follow these steps:
1.Select By Internet, and then press the ENTER button. The Connecting to Server message appears.
2.If there is a download available, the Download
3.When the download is complete, the Upgrade Query window appears with three choices: Upgrade Now, Upgrade Later, or Don’t Upgrade.
4.If you select Upgrade Now, the product upgrades the software, turns off, and then turns on automatically.
5.If you do not make a selection in one minute or select Upgrade Later, the product stores the new upgrade software. You can upgrade the software later using the By Downloaded function.
6.If you select Don’t Upgrade, the product cancels the upgrade.
44 English
✎NOTE
Your product must be connected to the Internet to use the By Internet function.
The upgrade is complete when the product turns off, and then turns on again by itself.
Never turn the product off or back on manually during the update process.
Samsung Electronics shall take no legal responsibility for product malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade.
If you want to cancel the upgrade while the upgrade software is downloading, press the ENTER button.
By USB
To upgrade by USB, follow these steps:
1.Visit www.samsung.com/bluraysupport
2.Download the latest USB software upgrade zip archive to your computer.
3.Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file.
4.Copy the folder to a USB flash drive.
5.Make sure the disc tray is empty, and then insert the USB flash drive into the USB port of the product.
6.In the product’s menu, go to Settings > Support > Software Upgrade.
7.Select By USB.
✎NOTE
The disc tray must be empty when you upgrade the software using the USB Host jack.
When the software upgrade is done, check the software details in the software Upgrade menu.
Do not turn off the product during the software upgrade. It may cause the product to malfunction.
Software upgrades using the USB Host jack must be performed with a USB memory flash stick only.
