Problem

Check

 

 

 

 

 

 

 

 

 

 

 

 

¥ Is the TV power turned on?

¥ The disc revolves but no

¥ Are the video cables properly connected?

¥ Is it the player in PAUSE mode?

picture appears.

¥ Is your TV’s video format (NTSC/PAL) set correctly?

¥ Picture shows interference

Press the NTSC/PAL button once again to change the current selection.

¥ Is there any dirt on the disc, or is the disc damaged?

and quality is poor.

¥ It may not be possible to play some DVD discs due to poor manufacture.

 

¥ When a dark scene changes to a bright scene during playback, the

 

screen may flicker vertically. Some disturbance is normal.

 

 

 

 

Remote control unit does

¥ Is the remote control being used within the appropriate distance

and angle of operation for the unit?

not operate.

¥ Are there any obstacles between the remote control unit and the

 

remote control sensor?

 

¥ Are the batteries dead? Is it time to replace the batteries with new ones?

 

 

 

 

Audio or subtitle language

¥ The audio or subtitle language features does not operate with

does not operate.

DVDs that do not include multiple audio or subtitle languages.

 

 

 

 

The Menu button is

¥Is the remote control being used within the appropriate distance

and angle of operation for the unit?

pressed but the Menu

¥Are the batteries dead?

screen does not appear.

¥Does the disc have a Menu?

 

 

 

 

The screen ratio cannot

¥ You can play 16:9 wide DVDs in 16:9 WIDE mode or 4:3 LETTER

BOX mode or 4:3 PAN-SCAN mode; but 4:3 encoded DVDs only

be changed.

show in 4:3 ratio. Refer to the DVD disc jacket and then select the

 

appropriate function.

 

 

 

 

The desired radio station

¥ Is the antenna installed properly?

cannot be tuned in.

¥ When the antenna's input signal is weak, install an external FM

 

antenna in an area with good reception quality.

 

 

 

 

 

¥ The password for the

¥ While the player is in the stop mode, hold the Stop (

 

) button

rating level has been

 

 

down on the main unit for over 5 seconds."INITIAL" appears on the

forgotten.

display and all settings will return to the Factory Preset condition.

¥ The DVD player is

The RESET function erases all settings; do not use this

malfunctioning.

function unless necessary.

 

 

 

 

 

37

Cautions on Handling and Storing Discs

Small scratches on the disc may reduce sound and picture quality or cause breaks in playback. Be especially careful not to scratch discs when handling them.

Handling and Storing Discs

When you get fingerprints or dirt on the disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.

¥ When cleaning, wipe gently from the inside to the outside of the disc.

Condensation may form if warm air comes into contact with cold parts inside the player. When condensation forms inside the player, the player may not operate correctly. If this occurs, remove the disc and let the player stand for 1 or 2 hours with the power on.

Disc Storage

Do not keep in direct

 

Keep in a cool

Keep in a clean

sunlight

 

ventilated area

Protection jacket.

 

 

 

Store vertically.

 

 

 

 

 

 

 

 

 

 

¥ Do not allow the discs to become contaminated with dirt.

¥Do not load cracked discs or discs that are scratched.

38