Installing the Speakers on the Tallboy Stand*HT-E4530 only - Front Speakers*HT-E4550 only - Front/Surround Speakers1.Turn the Stand Base upside-down and
2. Use the driver to combine the screws on the 3 marked holes.
Connecting The Speakers
connect it to the Stand. | 1 | Stand Base | 2 |
|
Stand
3.Straighten a supplied speaker wire and put in4. | the hole on the centre of Stand Base. | 3 | 4 |
Connect the upper Speaker to the assembled |
| Speaker | |
| Stand. |
|
|
|
|
| Stand |
5. | Insert a screw clockwise into the hole on the | 5 | 6 |
| rear of the speaker using a screwdriver. | ||
6. | And then connect a speaker cable. |
|
|
This is the appearance after the speaker is |
|
| |
| installed. |
|
|
| Follow this steps to install other speaker. |
|
|
*
*
colour coded plug on each bundle to the coloured sticker on the bottom of each speaker.
2.To attach speaker wire to each speaker:a. Press down the red tab on the back of the speaker, insert the red wire, | Black | Red |
and then release the tab. |
|
|
b. Press down the black tab on the back of the speaker, insert the black wire, and then release the tab.
3.Connect the speaker wire plugs to the back of the product by matching the colours of the speaker plugs to the colours of the speaker jacks.
English 17Connections 03