Connecting the FM Antenna

Connections

CAUTION

If you want to install the product on the wall, fasten the screws or nails on the wall firmly and use the holes on the rear of speaker to install. However, when you install it, accessories (nails or screws) and installation is not provided by the company.

Do not let children play with or near the speakers. They could get hurt if a speaker falls.

When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.

Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances into the duct (hole) of the subwoofer speaker.

Do not hang the subwoofer on the wall through the duct (hole).

Do not insert any other card except the TX card dedicated to the product.

If you insert a different TX card, you can damage the product and may not be able to remove the card easily.

Do not insert the TX card upside down or in the reverse direction.

Insert the TX card when the product is turned off. Inserting the card when it is turned on may cause a problem.

The wireless receiving antenna is built into the wireless receiver module. Keep it away from water and moisture.

For optimal listening performance, make sure that the area around the wireless receiver module location is clear of any obstructions.

If you hear no sound from the wireless surround speakers, switch the mode to Dolby Pro Logic II.

In 2-CH mode, you will hear no sound from the wireless surround speakers.

NOTE

If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic field.

Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the product, sound from the speakers may be disrupted because of interference.

If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment or any other device that uses the 2.4/5.8GHz frequencies near the product, sound from the speakers may be disrupted because of interference.

The maximum transmission distance from the product to the wireless receiver module is about 10m, but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is between the product and the wireless receiver module, the system may not operate at all, because the radio wave cannot penetrate metal.

If the product doesn't make a wireless connection, you need to run an ID Set between the product and wireless receiver module. With the product turned off, press "0""1""3""5" on the remote control. Turn on the wireless receiver module. Then, press and hold the “ID SET” button on the back of the wireless receiver module for 5 seconds, and then turn the product on.

FM Antenna (supplied)

SPEAKERS OUT


CENTER		FRONT	FRONT TOP
SUBWOOFER		FRONT	FRONT TOP



	SPEAKER IMPEDANCE : 3			iPod	LAN	WIRELESS	HDMI OUT

AUX

HDMI IN

VIDEO

OUT

FM ANT

OPTICAL

DIGITAL

AUDIO IN

1 . Connect the FM antenna supplied to the FM ANTENNA Jack.

2 . Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

NOTE

This product does not receive AM broadcasts.

18 English

HT-E6750W_XU_0223.indd 18

2012-02-23 오후 4:41:12

HT-E6750W/EN, HT-E6750W/TK, HT-ES6200/EN, HT-ES6200/ZF, HT-E6750W/XN specifications

The Samsung HT-E6750W/ZF and HT-ES6200/ZF are two distinct home theater systems that epitomize Samsung's commitment to delivering high-quality audio and video experiences. Each model features a range of cutting-edge technologies designed to enhance movie nights, music listening sessions, and gaming experiences.

Starting with the Samsung HT-E6750W/ZF, this system boasts a powerful 7.1 channel surround sound configuration. The incorporation of advanced audio technologies like Dolby TrueHD and DTS-HD Master Audio ensures that users enjoy cinema-quality sound right in their living rooms. The system also features wireless rear speakers, eliminating the hassle of cable management without compromising on sound quality.

One of the standout features of the HT-E6750W is its 3D Blu-ray player, which allows users to enjoy their favorite movies in stunning 3D resolution. The integrated Smart Hub provides access to a variety of streaming services, letting users watch content from platforms such as Netflix, YouTube, and others directly through the system. Moreover, with built-in Wi-Fi, users can easily stream music and videos without the need for additional setups.

On the other hand, the Samsung HT-ES6200/ZF offers a sleek design and a more compact 5.1 channel configuration, making it perfect for smaller spaces. Despite its smaller size, the audio quality is impressive, thanks to technologies like Crystal Clear Technology, which enhances dialogue clarity and provides a more immersive audio experience.

This model also features an integrated 3D Blu-ray player and Smart Hub, bringing users the same convenience and access to content as the HT-E6750W. The system supports various audio formats, including MP3 and WMA, catering to different music preferences.

Both systems utilize Samsung's Anynet+ technology, allowing users to control multiple compatible devices with a single remote, simplifying the user interface. Additionally, Bluetooth connectivity in both models makes it easy to connect smartphones and tablets for a more personalized listening experience.

In summary, the Samsung HT-E6750W/ZF and HT-ES6200/ZF deliver outstanding sound and video quality, with features tailored to meet the needs of modern home entertainment enthusiasts. Whether it’s the expansive surround sound of the HT-E6750W or the compact design of the HT-ES6200, both systems are engineered to provide a rich multimedia experience that elevates home viewing and listening.

Samsung HT-E6750W/XE, HT-ES6200/XN, HT-E6750W/XN Connecting the FM Antenna, FM Antenna supplied

Models: HT-E6750W/EN HT-E6750W/TK HT-ES6200/EN HT-ES6200/ZF HT-E6750W/XN HT-E6750W/SQ HT-E6750W/XE HT-ES6200/XN HT-ES6200/XE HT-E6750W/ZF

Connections