6.Repeat Steps 4 and 5 until you have filled in all parameters.

You can get the network parameter values from your Internet provider.

7.When finished entering all the parameter values, select Return ('), and then press the E button. The home cinema verifies the network connection and then connects to the network.

Wireless Network

You can set up a wireless network connection in three ways:

-Wireless Automatic

-Wireless Manual

-WPS(PBC)

Before you configure the wireless network connection, disconnect any wireless network devices currently connected to the product or, if applicable, the product's current wired connection.

Wireless - Automatic

Follow the Steps 1 to 3 in "Configuring Your Network Connection". (See page 20)

1.In the Network Settings screen, change Network Type to Wireless. The product searches for and then displays a list of the available networks.

Network Settings

4.When finished, select Done, and then press the E button. The product verifies the network connection and then connects to the network.

You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem.

Wireless - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

Follow the Steps 1 to 3 in "Configuring Your Network Connection". (See page 20)

1.

In the Network Settings screen, change

 

Network Type to Wireless. The product

 

searches for and then displays a list of the

2.

available networks.

Scroll through the list, select the desired network

3.

or Add Network, and then press the E button.

If you selected a network in Step 2, go to Step 6.

4.

If you selected Add Network, go to Step 4.

Enter your wireless network or wireless router's

 

name.

 

• Enter numbers directly using the number

 

buttons on your remote control.

 

• Enter letters by selecting a letter with the

 

▲▼◄► buttons, and then pressing the E

 

button.

 

• To display capital letters (or redisplay lower

 

case letters if capital letters are displayed),

Settings

Select your network type.

Network Type

Wireless

Wireless network

si-ap

MIC

KIMING_VTOWER

You can connect your BD Home Theater to the internet. Please select which wireless network to use.

select

, and then press the E button.

• To display symbols and punctuation, select

123#&, and then press the E button. To

redisplay letters, select 123#&, and then press

the E button.

When finished, select Done, and then press the

WPS(PBC) Search

m Move " Select ' Return

2.Select the desired network, and then press the E button.

3.On the Security screen, enter your network's security code or pass phrase.

Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with ▲▼◄► buttons, and then pressing E button.

Ebutton.

5.On the Security method screen that appears, use the ▲▼ buttons to select the network's Security method, and then press the E button. On the next screen, enter your network's security code or pass phrase.

Enter numbers directly using the number buttons on your remote control.

Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button.

21 - English

HT-H5500_00W_30_50_50W-ENG_0402.indd 21

2014-04-02 ￿￿ 1:07:46