31P~60P(P10)-GB 2/1/05 10:45 AM Page 58

Before Calling for Service

Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center.

Symptom

 

Check/Remedy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Disc tray does not open.Is the power cord plugged securely into the outlet?

 

Turn off the power and then turn it back on.

 

 

 

 

 

 

 

 

 

Playback does not start.
Check the region number of the DVD.

 

DVD discs purchased from abroad may not be playable.

 

CD-ROMs and DVD-ROMs cannot be played on this DVD

 

 

player.

 

Make sure that the rating level is correct.

 

 

 

 

 

 

 

 

 

 

Playback does not start
Are you using a deformed disc or a disc with scratches on

immediately when the

the surface?
Play/Pause button is pressed.Wipe the disc clean.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sound is not produced.

No sound is heard during fast playback, slow playback, and step

 

motion playback.

 

Are the speakers connected properly? Is the speaker setup

 

 

correctly customized?

 

Is the disc severely damaged?

 

 

 

 

 

 

 

 

 

Sound can be heard onlyWhen listening to a CD or radio, sound is output to the front

 

speakers (L/R) only. Select "PRO LOGIC II" by pressing

 

 

 

 

 

 

 

 

 

 

 

from a few speakers and

 

(Dolby Pro Logic II) on the remote control to use all six speakers.

not all six.

Make sure that the DVD disc is 5.1-CH compatible.
If you set C, SL, and SR to NONE in the speaker mode in the

 

 

audio setup of the setup screen, no sound is heard from the

 

 

center speaker and the front left and right speakers. Set C, SL,

 

 

and SR to SMALL.

 

 

 

 

 

 

 

 

 

Picture does not appear, sound

Was the DVD player suddenly moved from a cold place to a warm

is not produced, or the disc

 

one? When condensation forms inside the player, remove the disc

 

and let the player stand for 1 or 2 hours with the power on. (You

tray opens 2 to 5 seconds later.

 

 

can use the player again after condensation disappears.)

 

 

 

 

 

 

 

 

 

Dolby Digital 5.1 CH

Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1

Surround Sound is not

 

CH Surround Sound is produced only if the disc is recorded with

 

5.1 channel sound.

produced.

Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in

 

 

the information display?

 

 

 

 

 

 

 

 

 

 

57