Connecting External Components

Connecting an External Digital, Analog Component

Example: Digital signal components such as a Set-top Box or CD Recorder.

Analog signal components such as a VCR or TV.

 

Audio Cable

 

(not supplied)

 

If the external analog compo-

Optical Cable

nent has only one Audio Out,

connect either left or right.

(not supplied)

 

External Digital

External Analog

Component

Component

1 Connect the Digital In 1 or 2 (OPTICAL) on the main unit to the Digital Output on the external digital component.

2 Connect Audio In on the Home Theater to Audio Out on the external analog component.

•Be sure to match connector colors.

3 Press AUX on the remote control to select ‘D.IN 1 / D.IN 2 / AUX’.

•Each time the button is pressed, the selection changes as follows: USB ➝ D.IN 1 ➝ D.IN 2 ➝ AUX.

•You can also use the FUNCTION button on the main unit.

The mode switches as follows: DVD/CD ➝ D.IN 1 ➝ D.IN 2 ➝ AUX ➝ USB ➝ FM.

Note • To listen to the audio from the TV in 5.1 channel through the main unit, press the Dolby Pro Logic II or the SUPER 5.1 button.

•You can connect Video Output jack on the VCR to the TV, and connect Audio Output jack on the VCR to this product.

Connecting the FM Antenna

GB

 

CONNECTIONS

FM antenna connection

1

Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.

2

Slowly move the antenna wire around until you find a location where reception is

good, then fasten it to a wall or other rigid surface.
Cooling Fan

The cooling fan supplies cool air to the unit to prevent overheating.

Please observe the following cautions for your safety.

• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise and may damage it.

•Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)

21

22