Installing the DVD player

Combine the round board

Stand

and the stand with the

 

1 screws (4).

Round Board

 

Insert two screws in the top

2 holes, but only screw them in 1/2 way.

Align the stand with the two

3 screws.

Fully tighten the screws to

4 secureplayer. the stand to the DVD

Insert the remaining four

5 screws & tighten.

Caution • Keep the main unit and speakers out of the reach of children as the equip- ment could tip over.

Tidying Cables Up

Push the cables connected to the

1 HDMI OUT, Component OUT, Video OUT ports into the groove shown in figure 1 using the Wire Hanger.

Push the cables connected to the

2 Audio IN, Anynet IN/OUT, Optical Digital Audio IN and Audio OUT ports into the groove shown in figure 2.

Open the holder cover of the round

3 board on the bottom of the stand and pass the cables through the holder.

4 Squeeze the cables into the groove on the holder of the round board.

5 Close the holder cover.

GB

Wire Hanger

1

Rear Side of

CONNECTIONS

 

the Main Unit

 

2

 

Round Board Holder

11

12