XM Display Mode
The XM features described here only operate when the optional XM antenna is connected to the main unit.
Press the XM DISPLAY button.
• Each time the XM DISPLAY button is pressed, the mode changes as follows:
CHANNEL NAME/NUMBER
CHANNEL CATEGORY
ARTIST NAME/SONG TITLE
SIGNAL STRENGTH
• When the Channel Name/Number is displayed :
• When the Channel Category is displayed :
• When the Artist Name/Song Title is displayed :
• When the Signal Strength is displayed :
Notes 
• The front panel display can indicate up to 10 alphanumeric characters at once. If the information contains more than 10 characters, the information scrolls from right to left.
•If the information contains a character that cannot be recognized by the unit, the character will be displayed with an underbar “ * ”.
ENG
Checking the XM signal strength
Press the XM DISPLAY button until “Signal” is displayed.
•The display changes as shown below according to the receiving condition.
| Display |
| Condition | |
|
|
|
|
|
| GOOD |
|
| Signal strength is good |
|
|
|
| |
| MARGINAL |
|
| Signal strength is marginal |
|
|
|
|
|
| WEAK |
|
| Signal strength is poor |
|
|
|
| |
| NO |
|
| Loss of signal |
|
|
|
|
|
Checking the Radio ID
Press the 
, 
button (or 
button on the main unit) to select channel “o”.
•The Radio ID is displayed. The ID below is just an example.
RADIO OPERATION
Note | • To sign up for an account with the XM Satellite Radio service, an XM Satellite |
| Radio ID number is required. Follow the procedure above to check your ID |
| number, and then access the website at “http://activate.xmradio.com” or call |
|
71 | 72 |
