Speaker Installation
How to install the speaker and the stand (Tallboy type)Component
A: SPEAKER
B: STAND
C: STAND BASE
D: Screw
E: Screw
GB
How to install the speaker and the stand (Half tallboy type)Component |
| |
A: SPEAKER |
| |
B: STAND | CONNECTIONS | |
C: STAND BASE | ||
| ||
D: Screw |
| |
E: Screw |
|
1 | Turn the STAND (B) |
| and connect it to the STAND |
BASE (C).
4 Connect the assembled stand to the SPEAKER (A).
2 Turning the screw (D) clockwise, connect it to two holes marked with the arrow using a screwdriver as shown in the ullustration.
5 Turning the screw (E) clockwise, connect to a hole on the rear of the speaker using a screwdriver as shown in the illustration.
3 Turning the supplied screw (E) clockwise, connect it to a hole on the rear of the Speaker.
6 This is the successfully assembled speaker.
*Make sure that the TALLBOY type speaker should be installed on the flat and stable area. Otherwise it may fall down due to external shock.
1 | Connect the SPEAKER (A) with |
| the STAND BASE (C). |
4 This is the successfully assembled SPEAKER (A).
2 Turning the screw (D) clockwise, connect it to two holes marked with the arrow using a screwdriver as shown in the illustration.
3 Turning the screw (E) clockwise, connect to a hole on the rear of the speaker using a screwdriver as shown in the illustration.
13 | 14 |