Connecting External Components
Connecting an External Digital Component
Example: Digital signal components such as a
Optical Cable
(not supplied)
1 Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
2 Press FUNCTION on the remote control to select ‘DIGITAL IN’.
•Each time the button is pressed, the selection changes as follows: DVD/CD ➝ USB ➝ DIGITAL IN ➝ AUX 1
➝ AUX 2.
•You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX 1 ➝ AUX 2 ➝ USB ➝ FM ➝ AM.
GB
Connecting an External Analog Component
Analog signal components such as a VCR or TV.
CONNECTIONS
Audio Cable
(not supplied)
If the external analog component has only one Audio Out, connect either left or right.
1 Connect Audio In on the Home Theater to Audio Out on the external analog component.
•Be sure to match connector colors.
2 Press FUNCTION on the remote control to select AUX 1 or AUX 2 input.
•Each time the button is pressed, the selection changes as follows: DVD/CD ➝ USB ➝ DIGITAL IN ➝ AUX 1
➝ AUX 2.
•You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX 1 ➝ AUX 2 ➝ USB ➝ FM ➝ AM.
17 | 18 |
