Before Calling for Service

Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center.

Symptom
Check/Remedy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Disc tray does not open.
Is the power cord plugged securely into the outlet?

 

Turn off the power and then turn it back on.

 

 

 

 

 

 

 

Playback does not start.
Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.

 

CD-ROMs and DVD-ROMs cannot be played on this DVD

 

player.

 

Make sure that the rating level is correct.

 

 

 

 

 

 

 

Playback does not start
Are you using a deformed disc or a disc with scratches on
immediately when the
the surface?
Play/Pause button is pressed.Wipe the disc clean.

 

 

 

 

 

 

 

 

 

 

 

 

 

Sound is not produced.

No sound is heard during fast playback, slow playback, and step

motion playback.

 

Are the speakers connected properly? Is the speaker setup

 

correctly customized?

 

Is the disc severely damaged?

 

 

 

 

 

 

 

Sound can be heard onlyWhen listening to a CD or radio, sound is output to the front

speakers (L/R) only. Select "PRO LOGIC II" by pressing

 

 

 

 

 

 

 

 

from a few speakers and

(Dolby Pro Logic II) on the remote control to use all six speakers.

not all six.

Make sure that the DVD disc is 5.1-CH compatible.
If you set C, SL, and SR to NONE in the speaker mode in the

 

audio setup of the setup screen, no sound is heard from the

 

center speaker and the front left and right speakers. Set C, SL,

 

and SR to SMALL.

 

 

 

 

 

 

 

Picture does not appear, sound

Was the DVD player suddenly moved from a cold place to a warm

is not produced, or the disc tray

one? When condensation forms inside the player, remove the disc

and let the player stand for 1 or 2 hours with the power on. (You

opens 2 to 5 seconds later.
can use the player again after condensation disappears.)

 

 

 

 

 

 

 

Dolby Digital 5.1 CH

Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1

Surround Sound is not

CH Surround Sound is produced only if the disc is recorded with

5.1 channel sound.

produced.

Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in

 

the information display?

 

 

 

 

 

 

 

Symptom

Check/Remedy

 

 

• Disc is rotating but no
Is the TV power on?

 

picture is produced.

Are the video cables connected properly?
• Picture quality is poor and
Is the disc dirty or damaged?

 

A poorly manufactured disc may not be playable.

picture is shaking.

 

 

 

 

 

 

 

 

The remote control does not

Is the remote control being operated within its operation range of

work.

angle and distance?

 

Are the batteries exhausted?

 

 

 

 

 

Audio language and

Audio language and subtitles will not work for DVDs not containing

subtitles do not work.

them. And depending on the disc, they may work differently.

 

 

 

 

 

Menu screen does not appear evenAre you using a disc that does not contain menus?
when the menu function is selected.

 

 

 

 

 

 

 

 

Aspect ratio cannot be

You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX

mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3

changed.

ratio only. Refer to the DVD disc jacket and then select the

 

appropriate function.

 

 

 

 

 

 

Can't receive radio

Is the antenna connected properly?

 

broadcast.

If the antenna's input signal is weak, install an external FM
antenna in an area with good reception.

 

 

 

 

 

• The main unit is not working.

 

 

 

 

 

 

 

 

Turn off the power and hold thebutton on the main unit for
(Example: The power goes out or
longer than 5 seconds.

 

strange noise is heard.)

 

 

 

 

 

• The DVD player is not
Using the RESET function will erase all stored settings.

working normally.

Do not use this unless necessary.

 

 

 

 

 

While “NO DISC” message appears on the display of main unit, hold
The password for rating

the main unit's

 

button for longer than 5 seconds.“INITIALIZE”

level has been forgotten.

appears on the display and all settings will return to the default values.

Press the POWER button.

 

Using the RESET function will erase all stored settings.

 

Do not use this unless necessary.

GB

MISCELLANEOUS

71

72