How to Install the Speaker on the Stand
ENg
1.Turn the STAND upside-down and connect it to the STAND BASE.
. Insert three small SCrEWS into three holes marked with arrows using a screwdriver as shown in the illustration.
3.Insert a large SCrEW into the hole on the rear of the Speaker STAND.
. Connect the assembled stand to the SPEAKEr.
5.Insert another large SCrEW into the hole on the rear of the speaker using a screwdriver as shown in the illustration.
. This is the successfully assembled speaker. Make sure that the speaker is installed on a fl at and stable area. Otherwise it may be easily knocked over.
1
STAND |
BASE |
STAND |
3
5
SPEAKER
STAND
● CONNECTIONS
How to Install the Speaker on the Stand Base
1.Connect the SPEAKEr with the
STAND BASE.
. Insert the SCrEW into the hole on the rear of the speaker using a screwdriver as shown in the illustration.
3.This is the SPEAKEr successfully assembled with the Stand Base.
1
SPEAKER
STAND
BASE
3
1
