Samsung HT-TX250 Speaker Installation, How to Install the Speaker and the Stand, HT-X250

Speaker Installation

How to Install the Speaker and the Stand

Connecting the Optional Wireless Receiving Amplifier ENG

To connect the rear speakers wirelessly, you have to purchase the wireless receiving module and

TX card from your Samsung retailer.

When you have Purchased the Wireless Receiving Module (SWA-3000)

12

34

56

1 Turn the STAND upside-down and connect it to the STAND BASE.

2 Turning the screw (A) clockwise, connect it to two holes marked with the arrow using a screwdriver as shown in the illustration.

3 Turning the supplied screw (B) clockwise, connect it to a hole on the rear of the Speaker STAND.

4 Connect the assembled stand to the SPEAKER.

5 Turning the screw (B) clockwise, connect to a hole on the rear of the speaker using a screwdriver as shown in the illustration.

6 This is the successfully assembled speaker.

•Make sure that the speaker is installed on a flat and stable area. Otherwise it may be easily knocked over.

HT-X250	Front Speaker (R)	Front Speaker (L)
	Center Speaker
		Subwoofer	CONNECTIONS
Rear Speaker (L)	Rear Speaker (R)
	WIRELESS RECEIVER MODULE

Component

STAND BASE

SPEAKER STAND Screw (A) Screw (B)

HT-TX250

Front Speaker (R) Front Speaker (L)

Center Speaker

Subwoofer

Rear Speaker (L) Rear Speaker (R)

WIRELESS RECEIVER MODULE

14 15