Settings (Con’t)
Dolby Pro Logic II Effect
This function works only in Dolby Pro Logic MUSIC mode.1 Press the
PL II MODE button to select <MUSIC> mode.2 Press the 
PL II EFFECT button to select <PANORAMA>, then press the Cursor 
, 
button to select the desired effect setting.
You can select either 0 or 1.
This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging.
3 Press the 
PL II EFFECT button to select 
, 
button to select the desired effect setting.
You can select between 0 and 7.
This sets the width of the center image. The higher the setting, the less sound comes from the center speaker.
4 Press the 
PL II EFFECT button to select <DIMENS>, then press the Cursor 
, 
button to select the desired setting
You can select between 0 and 6.
Incrementally adjusts the sound field (DSP) from the front or rear.
• When playing a DVD disc encoded with two or more channels,
selected automatically and the 
(Dolby Pro Logic II) button does not work.
Listening to Radio | GB |
Automatic Tuning 1 : When the 
button is pressed, a preset broadcast station is selected.
Automatic Tuning 2 : Press and hold the ,
button to automatically search for active broadcasting stations.
Manual Tuning : Briefly press the ,
button to increase or decrease the frequency incrementally.
Automatic Tuning 1 : Press the STOP ( 
) button to select <PRESET> and then press
the 
button to select the preset station.
Automatic Tuning 2 : Press the STOP ( 
) button to select <MANUAL> and then press and hold
the 
button to automatically search the band.
Manual Tuning : Press the STOP ( 
) button to select <MANUAL> and then briefly press
the 
button to tune in to a lower or higher frequency.
Press the MO/ST button to listen in Mono/Stereo.Each time the button is pressed, the sound switches between <STEREO> and <MONO>.
In a poor reception area, select MONO for a clear,
MISCELLANEOUS
54 | 55 |