Front/rear Tallboy Stand (HT-TX715 only)

Speaker Components

SCREW (Large) :

4EA

SPEAKER

STAND

STAND BASE

SCREW (Small) :

 

 

 

16EA

ENG

CONNECTIONS ●

How to Install the Speaker on the Stand

1.Turn the STAND upside-down and connect it to the STAND BASE.

. Turning the SCrEW (Small) clockwise, connect it to four holes marked with the arrow using a screwdriver as shown in the illustration.

. Connect the assembled stand to the SPEAKEr.

4.Turning the SCrEW (Large) clockwise, connect to a hole on the screwdriver as shown in the illustration.

1

STAND

 

BASE

STAND



 SPEAKER

STAND

4

. This is the successfully assembled speaker.



 

M ` Make sure that the TALLBOY type speaker should be installed on the fl at and stable area. Otherwise it may fall down due to external shock.

1