Before Using Your Home Theater

Your Home Theater is capable of playing DVD, CD, MP3/WMA and JPEG discs.Depending on the disc you are using, these instructions may vary slightly. Read the instructions carefully before using.

To Operate the TV and DVD Player with a Single Remote Control

GB

1

Plug the main unit's power
cord into the AC power
supply.4 Press TV/VIDEO button to select VIDEO mode on your TV.

VIDEO

2

5

Press TV button to set the remote to TV mode.

Press DVD RECEIVER

button to switch to DVD RECEIVER mode.
3 Press the POWER button to turn on your Samsung TV with this remote.Press FUNCTION button on6 the main unit or DVD buttonon the remote to enable DVD/CD playback.

OPERATION

Selecting the Video Format

Press and hold NT/PAL button on the remote controller for over 5 seconds while the power is turned off.

By default, the video format is set to "PAL".

"NTSC" or "PAL" will appear in the display. At this time, press the NT/PAL button shortly to select between "NTSC" and "PAL".

 

Each country has a different video format standard.

23

For normal playback, the video format of the disc must be the same as the video

format of your TV.

 

Note

Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.

By default, the remote control is set to work with Samsung TVs.

See page 69 for more information about remote control operation with other manufacturer's TVs.

24