HDMI FUNCTION
resolution Selection
This function allows the user to select the screen resolution for HDMI output.
In Stop mode, press and hold the SD/HD (Standard Defi nition/High Defi nition) button on the remote control.
~Resolutions available for the HDMI output are 480p, 720p, 1080i/1080p.
~SD(Standard Defi nition) resolution is 480p and HD (High Defi nition) resolution is 720p, 1080i/1080p. The default value of HDMI output is 480p.
ENG
● CONNECTIONS
M ` If the TV does not support the confi gured resolution, you will not be able to see the picture properly.
`When an HDMI cable is connected, composite and component video signals are not output.
`See your TV owner's manual for more information on how to select the TV's Video Input source.
Why use HDMI (High Definition Multimedia Interface)?
This device transmits a DVD video signal digitally without the process of converting to analog. You will get sharper digital pictures when using an HDMI connection.
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this Home Theater to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs that support Anynet+.
1.Connect the main unit of the Home Theater to a Samsung TV with an HDMI cable. (See page 19)
. Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
~You can operate the Home Theater by using the TV remote control. (Available TV buttons : 
, 
, 
, 
, , and , buttons,
~ 
button)
If you select the TV
Set the
•receiver : On : You can listen to audio through the Home Theater.
•receiver : Off : You can listen to audio through the TV.
With Anynet+
You can operate this unit, power on your TV, or watch a movie by pressing the Play button on your Samsung TV's remote control.
MOVE | ENTEr | EXIT |
If you select the THEATEr
Select THEATEr to connect and set the option of each item below.
•View TV : If Anynet+(HDMI CEC) is set to on and you select View TV, the home theater will automatically switch to digital in mode.
•Theater Menu : you can access and control the Home theater menu.
•Theater Operation : The Home Theater disc playback information will be displayed. You can control the Disc operation of the Home Theater such as title, chapter and subtitle change.
•receiver : On : You can listen to audio through the Home Theater.
•receiver : Off : You can listen to audio through the TV.
MOVE | ENTEr | EXIT |
M ` If you chose 'View TV' and you want to listen to TV sound through Digital In of the Home theater, you have to connect an optical cable between the TV and the Home Theater.
1
