Connecting the Speakers

HT-TXQ100

GB

HT-XQ100/HT-XQ100W

Speaker Packages

Please confirm that all the following contents are included in the package.

Speaker Accessories

Front Speaker (2EA)

Rear Speaker (2EA)

Subwoofer Speaker

Center Speaker

Speaker Cable (6EA)

Assembling the Speakers

Set the front speaker on the front stand.

Speaker Packages

Please confirm that all the following contents are included in the package.

Speaker Accessories

Front Speaker (2EA)

Rear Speaker (2EA)

Subwoofer Speaker

Center Speaker

Speaker Cable (6EA)

CONNECTIONS

 

Components

(A) Speaker

(B) Aluminum Bar

(C) Stand Base

(D) Speaker Support

(E) Screws (3 Types of Big, Mid and Small)

To mount the speakers on the wall

Drive a screw into the wall for each speaker and

Hook the speakers so

then hook the front speaker over them.that the screws are in the

position of the figure.

Assemble the (B) Aluminum Bar and the

(C) Stand Base as the figure shows.

Have the speaker cable pass through the

(D) Speaker Support and

assemble the Speaker Support and the Aluminum Bar.

Line up the groove of the Speaker Support and the projection of the Speaker and assemble the Speaker and the (D) Speaker Support by pressing them until the Speaker is fixed as the figure shows.

*If you press too hard, the projection might be damaged. Take care when you assemble them.

Fasten the screws (big size) with a screw driver.

*You have to fasten the screws in all the three holes.

Fasten the screws (small-size) with a screw driver.

*You have to fasten the screws in all the three holes.

Fasten the screws (mid-size) with a screw driver onto the rear side of the Speaker Support as the figure shows.

Have the speaker cable pass through the Stand Base and Aluminum Bar.

Connect the speaker cable to the (A) Speaker paying attention to the polarity of the speaker cable.

*The cable marked with black line is to be connected to (-).

This is the successfully assembled speaker. Assemble the other speaker according to the same procedures.

13

 

 

 

• Make sure that the TALLBOY type speaker should be installed on the flat and stable area.

14

 

Caution

 

 

 

 

 

 

 

Otherwise it may fall down due to external shock.