Samsung HT-Z110 Setting the Test Tone, TEST TONE, but, ton to move to ‘Audio’, and then press, To end the test tone, press TEST TONE button again

Setting the Test Tone

Use the Test Tone feature to check the speaker connections.

Setting the DRC (Dynamic Range Compression)This feature balances the range between the loudest and quietist sounds.

You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.

GB

In Stop or no1 disc mode, press MENU button.

MOVE ENTER EXIT

2	Press Cursor	but-	3	Press Cursor	button
	ton to move to ‘Audio’			to move to ‘TEST
	and then press			TONE’ and then press
	ENTER button.			ENTER button.
			• The test tone will be sent to L ➝ C ➝
			R ➝ SR ➝ SL ➝ SW in order.
			If the ENTER button is pressed again
			at this time, the test tone will stop.
	MOVE ENTER	EXIT

1 In Stop or no disc mode, press MENU button.

Press Cursor 2 button to move to‘Audio’ and then press ENTERbutton.

MOVE ENTER RETURN EXIT

MOVE ENTER EXIT MOVE ENTER EXIT

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

Alternate method: press the TEST TONE button on the remote.

Press TEST TONE button. L: Front Speaker (L) C: Center Speaker

STOPEXIT

SW: Subwoofer

Press Cursor 3 button to move to‘DRC’ and then press ENTER button.

4 Press Cursor , to adjustthe ‘DRC’.

•When the Cursor button is pressed, the effect is greater, and when the Cursor button is pressed, the effect is smaller.

SETUP

R: Front Speaker (R) SL: Rear Speaker (L) SR: Rear Speaker (R)

• Test tone will be produced as follows:

When playing a DVD or CD, this will work only in Stop mode.

• Use this function to check that each speaker is correctly connected and that there is no problem.

Multi-Channel Pro Logic Mode

MOVE ENTER RETURN EXIT CHANGE RETURN EXIT

To end the test tone,

Start

press TEST TONE button again.

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

47 48