DivX (R) Registration

Please use the Registration code to register this player with the DivX (R) video on demand format. To learn more, go to www.divx.com/vod.

Setting the Speaker Mode

Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not.

1.In Stop mode, press the MENU button.

2.Press the Cursor % button to move to Audio and then press the

ENTER button.

MOVE ENTER RETURN EXIT

3.In the SPEAKER SETUP, press the ENTER button again.

4.Press the Cursor ,,,button to move to the desired speaker and then press the ENTER button.

• For C, SL, and SR, each time the button is pressed, the mode switches alternately as follows : SMALL ➞ NONE.

•For L and R, the mode is set to SMALL.

• SMALL : Select this when using the speakers.

MOVE CHANGE RETURN

EXIT

 

•NONE : Select this when no speaker is connected.

dPress the RETURN button to return to the previous level.

dPress the EXIT button to exit the setup screen.

MM`` Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 51).

Setting the Delay Time

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the centre and rear speakers.

1.In Stop mode, press the MENU button.

2.Press the Cursor % button to move to Audio and then press the ENTER button.

3.Press the Cursor % button to move to DELAY TIME and then press the ENTER button.

4.Press the Cursor ,,,button to move to the desired speaker and then press the ENTER button.

5.Press the Cursor ,to set the Delay time.

•You can set the delay time for C between 00 and 05mSEC and for SL and SR between 00 and 15mSEC.

dPress the RETURN button to return to the previous level.

dPress the EXIT button to exit the setup screen.

En G

syst● em tupse

43