system setup
SETTING THE AUDIO
Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button.
Press the SOUND EDIT button and then press the Cursor , button.
Adjusting Front/Rear Speaker Balance
You can select between 00,
The volume decreases as you move closer to
Adjusting Center/Rear/Subwoofer Speaker Level
The volume level can be adjusted in steps from +6dB to
The sound gets louder as you move closer to +6dB and quieter as you get closer to
SETTING THE DRC (DYNAMIC RANGE COMPRESSION)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
1.In Stop mode, press the MENU button.
2. Press the Cursor ▼ button to move to Audio and then press the ENTER button.
3.Press the Cursor ▼ button to move to DRC and then press the
ENTER button.
4. Press the Cursor , to adjust the DRC. | MOVE ENTER RETURN EXIT |
|
•When the Cursor button is pressed, the effect is greater, and when the Cursor button is pressed, the effect is smaller.
dPress the RETURN button to return to the previous level.
dPress the EXIT button to exit the setup screen.
CHANGE | RETURN | EXIT |
SETTING THE AV SYNC
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to match the video.
1. | In Stop mode, press the MENU button. |
|
| ||
2. | Press the Cursor ▼ button to move to Audio and then press the |
|
| ENTER button. |
|
3. | Press the Cursor ▼ button to move to |
|
| the ENTER button. |
|
4. | Press the Cursor , button to select the | MOVE ENTER RETURN EXIT |
| and then press the ENTER button. |
|
•You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.
dPress the RETURN button to return to the previous level.
dPress the EXIT button to exit the setup screen.
MOVE SELECT RETURN EXIT
SETTING THE HDMI AUDIO(optional)
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
1.In Stop mode, press the MENU button.
2. Press the Cursor button to move to Audio and then press the ENTER button.
3.Press the Cursor button to move to HDMI AUDIO and then
press the ENTER button.
4. Press the Cursor , button to select ON or OFF and then press | MOVE | ENTER | RETURN | EXIT |
|
|
|
| |
the ENTER button. |
|
|
|
|
• ON : Both video and audio signals are transmitted over the HDMI |
|
|
|
|
|
|
|
| |
connection cable, and audio is output through your |
|
|
|
|
TV speakers only. |
|
|
|
|
• OFF : Video is transmitted over the HDMI connection cable only, |
|
|
|
|
and audio is output through the home cinema speakers only. | MOVE | SELECT | RETURN | EXIT |
| ||||
|
|
|
|
|
dPress the RETURN button to return to the previous level.
dPress the EXIT button to exit the setup screen.
M The default setting of this function is HDMI AUDIO OFF.
HDMI AUDIO is automatically
ENG
SETUP SYSTEM ●
58 | 59 |