Playback
DISC PLAYBACK
1.Press the OPEN/CLOSE (
) button to open the disc tray. . Load a disc.
~Place a disc gently into the tray with the disc’s label facing up.
3.Press the DISC SKIP button.
~Rotate the carousel tray so you can load the third, fourth, and fi fth discs.
. Close the compartment by pressing the OPEN/CLOSE (
) button again.
~Playback starts automatically.
ENg
dB
● PLAYBACK
To stop playback, press the STOP (
) button during playback.
~If pressed once, PrESS PLAY is displayed and the stop position will be stored in memory.
If the PLAY (
) button or ENTEr button is pressed, playback resumes from the stop position. (This function works only with DVDs.)
~If pressed twice, STOP is displayed, and if the PLAY (
) button is pressed, playback starts from the beginning.
To temporarily pause playback, press the PAUSE ( 
) button during playback.
~To resume playback, press the PLAY (
) button.
M ` Depending on the content of the disc, the initial screen may appear different.
`Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection system) recommendations.
Selecting a Disc in the Disc changer
To select a specifi c disc, press the corresponding the DIRECT PLAY (1, 2, 3, 4, 5) buttons on the front panel or the DISC SKIP button on the remote control, until the required disc indicator
fl ashes.
~ If the disc selected is not loaded, the next disc is played automatically.
35
