Rear Panel
1. AUX IN 1 Terminal
1. Use an Audio Cable (supplied) to connect AUX IN 1 on the product to Audio Out on an exter- nal analog component.
2. AUX IN 2 Terminals
1. Use an Audio Cable (not supplied) to connect AUX IN 2 on the product to Audio Out on an external analog component.
• Be sure to match connector colors.
• If the external analog component has only one Audio Out jack, connect to either the left or right terminal.
3. SUBWOOFER Connector Terminal
4. FRONT L Connector Terminal
5. POWER SUPPLY IN
1 | 2 | 3 | 4 | 5 |
Connecting your System to the Power Supply
Before plugging your system into a main socket, you must check the voltage.
1. Connect the AC power adaptor jack to the power supply jack properly, and then connect the AC power adaptor plug in the wall outlet.
• When disconnecting the power cable of the AC power adaptor from a wall outlet, pull the plug. Do not pull the cable.
• Do not connect this unit or other components to an AC outlet until all connections between components are complete.
4
