functions

Using the TV functions (with Samsung TVs only)

•Press TV SOURCE on the remote control to change the TV's input source.

•Press TV INFO on the remote control to display the TV channel information.

•Press TV CH on the remote control to select the TV channel.

•Press TV VOL on the remote control to increase or decrease the volume level.

•Use TV PRE-CHbutton to move to the previous TV channel in TV mode.

▪▪ When you press the SoundConnect button, the TV's sound is transmitted through the Soundbar system via a Bluetooth connection. The Soundbar also controls the sound volume, sound quality, etc.

▪▪ The remote control can operate TVs made by SAMSUNG only.

OPTICAL

AUX

USB/

TV SOURCE

 

 

 

 

 

AUTO POWER SoundConnect

REPEAT

 

 

 

 

 

TVVOL

TVCH

 

AUDIO SYNC

 

 

 

 

 

 

 

 

 

TV MUTE TV INFO TV PRE-CH DIMMER

SOFTWARE UPGRADE

Samsung may offer upgrades for the Wireless Audio - Soundbar's system firmware in the future.

If an upgrade is offered, you can upgrade the firmware by connecting a USB drive with the firmware upgrade stored on it to the USB port on your Soundbar.

Note that if there are multiple upgrade files, you must load them onto the USB drive singly and use them to upgrade the firmware one at a time.

Please visit Samsung.com or contact the Samsung call center to receive more information about downloading upgrade files.

▪▪ Insert a USB drive containing the firmware upgrade into the USB port on the main unit.

▪▪ Do not disconnect the power or remove the USB drive while upgrades are being applied. The main unit will turn off automatically after completing the firmware upgrade.

When software is upgraded, settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.

▪▪ Once upgrading the product software is completed, turn off the product and then press and hold (@) button for a while to reset the product.

▪▪ If the firmware fails to upgrade, we recommend formatting the USB device in FAT16 and trying again.

▪▪ For upgrading purposes, do not format the USB drive in NTFS format because it is not a supported file system. ▪▪ Depending on the manufacturer, some USB devices may not be supported.

20