Use the provided cable if a USB flash memory device cannot be connected directly to the unit.

functions

INPUT MODE

You can select D.IN, AUX, HDMI, BT, TV input, or USB.

Press an appropriate button on the remote control to select a desired mode, or press () to select : D.IN, AUX, HDMI, BT, TV ,or USB mode.

Input modeDisplay

 

 

 

Optical Digital inputD.IN

 

 

 

AUX input

AUX

 

 

 

HDMI inputHDMI

 

 

 

BLUETOOTH mode

BT

 

 

 

TV mode

TV

POWER

POWER

TV POWER

USB modeUSB

 

 

AUTO

 

 

 

SOURCE

POWER SPEAKER TV SOURCE

The unit turns off automatically in the following situations:
• BT/TV MODE

SoundConnect

REPEAT

-- If there is not connected for about 25 minutes.

 

USB/HDMI/ARC/D.IN MODE-- If there is no audio signal for about 25 minutes.AUX Mode

-- When the AUX cable is connected, if no key is pressed on the remote or unit panel for about 8 hours. -- If the AUX cable is disconnected for about 25 minutes.

The ARC function is activated in D.IN mode if the unit is connected to an ARC supporting TV. To turn off the ARC function, turn Anynet off.

BLUETOOTH

You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!

What is Bluetooth?

Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each other using a short ,wireless connection.

A Bluetooth device may cause noise or malfunction, depending on usage, when:

-- A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the Soundbar. -- It is subject to electrical variation from obstructions caused by a wall, corner, or office partition.

-- It is exposed to electrical interference from same frequency-band devices including medical equipment, microwave ovens, and wireless LANs.

Pair the Soundbar with the Bluetooth device while they are close together.

The further the distance is between Soundbar and Bluetooth device, the worse the quality is. If the distance exceeds the Bluetooth operational range, the connection is lost.

In poor reception-sensitivity areas, the Bluetooth connection may not work properly.

The Bluetooth connection only works when it is close to the set. The connection will be automatically cut off if the Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles such as walls or doors.

This wireless device may cause electric interference during its operation.

ENG

FUNCTIONS ●

15