REMOTE CONTROL
REMOTE CONTROL
REMOTE CONTROL BUTTONS AND FUNCTIONS
SOURCE
Press to select a source connected to the Soundbar.
MUTE
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
REPEAT
Press to set the REPEAT function during music playback from a USB device.
Skip Forward
If there is more than one file on the device you are playing, and you press the ] button, the next file is selected.
SOUND CONTROL (*Use the [,] buttons to adjust level.)
Press to select TREBLE, BASS, or AUDIO SYNC. Then, use the [,] buttons to adjust the Treble, Bass volume from
If the Soundbar is connected to a digital TV and the video appears out of sync with the audio, press the SOUND CONTROL button to sync the audio with the video. Use the [,] buttons to set the audio delay between 0 ms and 300 ms. In USB mode, TV mode, and BT mode, the Audio Sync function may not work.
Press and hold the SOUND CONTROL button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz, 2.5KHz, 5KHz and 10KHz are selectable and each can be adjusted to a setting between
AUTO POWER
Press the AUTO POWER button. Each time the button is pressed, the selection changes as follows :
WOOFER (* Use the [,] button to adjust the Volume.)
You can control the woofer volume.
Press the [,] button to increase or decrease the subwoofer volume.
You can select SW
●● Soundbar is a Samsung proprietary name.
●●Operate the TV using the TV's remote control.
ENG
9