CONNECTIONS

The main unit, the subwoofer and the SWA-8000S should now be linked (connected).

The LINK indicators (Blue LEDs) on the subwoofer and the SWA-8000S should be glowing continuously and not blinking.

If the LINK indicators are not solid blue, the linking process has failed.Turn off the main unit, go back to Step 2, and start again.

You can enjoy better sound from the wireless subwoofer by selecting a Sound Effect. (See page 9)

CONNECTING THE SURROUND SPEAKERS (SOLD SEPARATELY)

ENG

LR

SURROUND SPEAKERS OUT

SPEAKER IMPED

ID SET

Surround Speaker (L)

Surround Speaker (R)

 

Wireless Receiver Module

Place these speakers to the side of your listening position. If there isn't enough room, place these speakers so they face each other. Position them about 60-90 cm above your ear, facing slightly downward.

Surround speakers must be connected to the wireless receiver module.

Each speaker has a colored label on its back or underside. Each cable has a single colored band near its end. Match the band on each cable to the speaker label by color, and then connect the cable to the speaker.

19