Samsung HW-K950/ZF, HW-K950/EN manual Id Set, Rear of Subwoofer

Connecting the Subwoofer and Surround Speakers Manually if the Automatic Connection Fails

cBefore You Begin

•Make sure that the Soundbar, the subwoofer, and the surround speakers are plugged in.

•Make sure that the Soundbar is turned on.

1.Press and hold ID SET on the rear of the subwoofer and surround speakers for at least 5 seconds. The red indicator at the rear of each speaker turns off and the blue indicator blinks.

LINK STANDBY	ID SET	ID SET
	LINK STANDBY

Rear of Subwoofer Rear of the Left and Right Surround Speakers

2.Turn off the Soundbar.

3.Press and hold the VOL button on the remote control for at least 5 seconds with the Soundbar turned off (OFF).

LE

EFFECT

	R
	WOOFE
	BA
VOL	SOUND

4.The ID SET message appears on the display of the Soundbar for a short period of time, and then disappears.

ID SET

Right Side of the Soundbar

5.When the blue indicators on the subwoofer and surround sound speakers blink, turn on the power by

pressing button on the right side of the Soundbar or on the remote control.

6.When the connection is successfully established, the blue indicators on the rear of the subwoofer and surround speakers turn on without blinking.

cIf the connection process fails, the blue indicators will flash continuously. Go to Step 1 and start again.

· 7 · English