Samsung HW-M4500/XV manual Bluetooth Power On Bluetooth Power

What are the BT READY and BT PAIRING statuses?

•• BT READY : In this mode, you can search for previously connected TVs or connect to the Soundbar from a previously connected mobile device

•• BT PAIRING : In this mode, you can connect to a new device. (While in “BT” mode, press and hold the

(Source) button for more than 5 seconds on the top panel of the Soundbar or on the remote control.)

NOTES

•• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.

•• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 10 meters.

•• The Soundbar automatically turns off after 5 minutes in the Ready state.

•• The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances:

––If there is a strong electrical field around the Soundbar.

––If several Bluetooth devices are simultaneously paired with the Soundbar.

––If the Bluetooth device is turned off, not in place, or malfunctions.

•• Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.

•• The Soundbar supports SBC data (44.1kHz, 48kHz).

•• Connect only to a Bluetooth device that supports the A2DP (AV) function.

•• You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free) function.

•• Once you have paired the Soundbar to a Bluetooth device, selecting “[AV] Samsung Soundbar Mxxxx M-Series” from the device’s scanned devices list will automatically change the Soundbar to “BT” mode.

––Available only if the Soundbar is listed among the Bluetooth device’s paired devices. (The Bluetooth device and the Soundbar must have been previously paired at least once.)

•• The Soundbar will appear in the Bluetooth device’s searched devices list only when the Soundbar is displaying “BT READY”.

•• Soundbar cannot be paired to another Bluetooth device, while using the Bluetooth function.

Bluetooth POWER On (Bluetooth POWER)

If a previously paired Bluetooth device tries to pair with the Soundbar when the Bluetooth POWER On function is on and the Soundbar is turned off, the Soundbar turns on automatically.

1.Press the Bluetooth POWER button on the remote while the Soundbar is turned on.

2.“ON-BLUETOOTH POWER” appears on the Soundbar’s display.

ENG - 18