Samsung 3-Kanal Soundbar Sound+, flat HW-MS650 TV, ARC, Connecting a TV using an HDMI Cable, Left, D.IN, D.IN, D.IN, TV ARC, TV ARC, TV ARC, HDMI IN, (Source)

3.Press the Left button on the remote control for 5 seconds to turn Auto Power Link on or off.

•• Auto Power Link is set to ON by default.

(To turn off this function, turn off Auto Power using the Soundbar.)

•• Depending on the connected device, Auto Power Link may not function.

•• This function is only available in the “D.IN” mode.

Connecting a TV using an HDMI Cable

Bottom of the Soundbar

Connect to the HDMI IN
(ARC) port of your TV.		HDMI IN
	
HDMI IN	HDMI Cable
(ARC)
	(not supplied)	HDMI OUT
		(TV-ARC)

Connect to the HDMI OUT (TV-ARC) port of the Soundbar main unit.

TV

ARC

Right Side of the

Soundbar

1.With the Soundbar and TV turned on, connect the HDMI cable (not supplied) as shown in the figure.

2.“TV ARC” appears in the display window of the Soundbar main unit and the Soundbar plays TV sound.

•• If TV sound is inaudible, press the(Source) button on the remote control or on the right side of the Soundbar to switch to “D.IN” mode. The screen displays “D.IN” and “TV ARC” in sequence, and TV sound is played.

•• If “TV ARC” does not appear in the display window of the Soundbar main unit, confirm that the cable is connected to the correct port.

•• Use the volume buttons on the TV’s remote control to change the volume of the Soundbar.

ENG - 8