2.Align the Paper Template’s Centre Line with the centre of your TV (if you are mounting the Soundbar below your TV), and then fix the Wall Mount Guide to the wall using tape.
•• If you are not mounting below a TV, place the Centre Line in the centre of the installation area.
450mm
Centre Line
3.Use a sharp object, such as a pen or pencil, to mark the holes’ positions, and then remove the Wall mount Guide.
450mm
4.Using an appropriately sized drill bit, drill a hole in the wall at each marking.
•• If the markings do not correspond to the positions of studs, make sure you insert appropriate anchors or mollies into the holes before you insert the support screws. If you use anchors or mollies, make sure the holes you drill are large enough for the anchors or mollies you use.
5.Push a screw (not supplied) through each
6.Install the 2
•• When assembling, make sure the hanger part of the
Rear of Soundbar
Right end of Soundbar
ENG - 24