English-8
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1. Press the MENU button to display the menu.
Press the or button to select “Channel”, then press theENTER button.
2. Press the or button to select “Manual Store”, then press theENTER button.
3. Press theENTER button to select “Programme”.
4. To assign a programme number to a channel, find the correct number by pressing the or button
and then press theENTER button.
You can also set a programme number by pressing number buttons on the remote control.
5. Press the or button to select “Colour System”, then press theENTER button.
6. Select the colour standard required by pressing the or button then, press theENTER button.
7. Press the or button to select “Sound System”, then press theENTER button.
8. Select the sound standard required by pressing the or button, then press theENTER button.
If there is an abnormal sound or no sound, re-select the sound system required.
9. If you know the number of the channel to be stored, press the or button to select “Channel”.
Press theENTER button. Select C(Air channel) or S(Cable channel) by pressing the or button.
Press the button to select channel. Select the required number by pressing the or button and then
press theENTER button.
Channel mode: P(Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing the number buttons on the remote control.
10. If you do not know the channel numbers, press the or button to select “Search”. Press the
ENTERbutton. Search by pressing the or button and then press the ENTER button.
11. Press the or button to select “Store”. Press the ENTERbutton to select “OK”.
12. Repeat steps 3 to 11 for each channel to be stored.
Programme: Selects a program number for the channel.
Colour System: Sets the colour supporting system.
Sound System: Sets the sound supporting system.
Channel:Selects a channel.
Search: Scans for the frequency value for the channel.
Store: Saves your settings.
Storing Channels Manually
You can exclude the channels you chose from the channels you scanned. When you scan through
the stored channels, those you have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed during scanning.
1. Use the number buttons to directly select the channel that will be added or deleted.
2. Press the MENU button to display the menu.
Press the or button to select “Channel”, then press theENTER button.
3. Press the or button to select “Add/Delete”, then press theENTER button.
4. Repeatedly pressing theENTER button will alternate between add channel and delete channel.
5. Press the P/buttons to switch to the appropriate channel, then repeat above.
6. Press the EXIT button to exit.
You can view any channel (including an erased channel) by using the number buttons on the remote control.
Editing the Channels
You can also add or delete channel by simply pressing the ADD/DELbutton on the
remote control.

BN68-00927R-00Eng.qxd 10/17/06 3:24 PM Page 8