Plug and Play
When the set is initially powered ON, several basic customer settings proceed automatically and subsequently.
The following settings are available.
1If the set is in standby mode, press the POWER 
button on the remote control.
Result: The message Start Plug & Play. is displayed. It appears for a little while, and then the Language menu is automatically displayed.
2Select the appropriate language by pressing the 
or 
button.
The available languages are listed.
You can choose one of 21 languages.
3Press the ENTER
button to confirm your choice.
Result: The message Check antenna input. is displayed with the OK selected.
4Press the ENTER
button.
Result: The following areas are available:
Belgium - France - Germany - Italy - Netherlands - Spain - Sweden - Switzerland - United Kingdom - Eastern Europe- Others
5Select your Country by pressing the 
or 
button. Press the ENTER
button.
Result: The Auto Store menu is displayed with the Start selected.
6Press the ENTER
button.
Result: The channel search will start and end automatically.
7Press the ENTER
button.
Select the hour or minute by pressing the 
or 
button. Set the hour or minute by pressing the 
or 
button.
(Refer to “Setting and Displaying the Current Time” on page 40)
8Press the ENTER
button to confirm your setting.
Result: The message Enjoy your watching. is displayed, and then the channel which has been stored will be activated.
