Samsung LF17TPTLSN/EDC, LF19TPTLSM/EDC manual Some graphic cards may not support your monitor

		Some graphic cards may not support your monitor.
		When you have a problem with the graphic card, visit
		our website to check the compatible graphic card list
		provided.
		http://www.samsung.com/monitor/magictune
MagicTune™	Have you changed	Download the latest program. The program can be
doesn't work	your PC or video	downloaded
properly.	graphic card?	http://www.samsung.com/monitor/magictune
	Did you install the	Reboot the computer after installing the program for the
	program?	first time. If a copy of the program is already installed,
		remove it, reboot the computer, and then install the
		program again. You need to reboot the computer for it to
		operate normally after installing or removing the
		program.

Visit the MagicTune™ website and download the installation software for MagicTune™ MAC.

Check the following items if there is trouble with the monitor.

Symptom Solutions

The screen does not appear when I switch to the Client Mode.

When booting up, it takes about 30 seconds for the networking functions to be activated and no screen is displayed for about 3 to 4 seconds.

Wait 30 seconds after the power is turned on, and try to switch modes again.

If the operating system does not boot up due to damage to Windows or a blue screen is displayed, download the Windows XPe OS from this site and recover your operating system with it : http://www.syncsight.com

The client screen	1)	Check if the Hub port LED to which the LAN cable is connected blinks. If not,
appears, but I	that indicates that the LAN connection is disconnected. In this case, connect
cannot connect to	using another LAN cable.
the server.	2)	Check if the settings of the 'Settings', 'Network' tab are properly set up. The
	default setting is "DHCP". If your network uses a static IP address, select 'Use
	the following IP address' and then enter the appropriate IP address information.
	3)	Check if the 'User Name' and 'Password' set in the 'Remote Desktop' tab of
	'Settings' are the same as those of the host PC. If not, match the 'User Name'
	and 'Password' of the 'Remote Desktop' with those of the host PC.
I cannot access the	1)	Check if the Hub port LED to which the LAN cable is connected blinks. If not,
Internet in the	that indicates that the LAN connection is disconnected. In this case, connect
Client screen.	using another LAN cable.
	2)	Check if the settings of the 'Network' tab of 'Settings' have been properly set
	up. The default setting is "DHCP". If your network uses a static IP address,
	select 'Use the following IP address' and then enter the appropriate IP address
	information.

The contents (video, voice) on the server do not play smoothly on the Client Monitor.

This is because the data is transmitted over the LAN. Check your LAN connection status.

I have connected a digital device such as a digital camera, camcorder or USB memory to the USB port, but they do not work.

This model supports USB devices that support removable disk functions without an additional driver installation. Check if the device you want to connect to is a device that supports the removable disk function without an additional driver installation.

The file list does	1)	Check the files on the card. If only abnormal files (e.g. 0KByte, broken JPEG)
not appear.	exist, the files do not appear on the screen.
	2)	The time required to display is determined by the size of the file. Wait a
	moment.
	3)	Check if the format of the file is supported by the Client Monitor. If the
	extension of the file has been changed, the file will not be played.