How to set up manually

1

Go to the Network Settings screen. Select Start, press E.

2

The Network function searches for available wireless networks. When done, it displays a list of the

 

available networks.

3

In the list of networks, press the or button to select a network, and then press the Ebutton

 

twice.

 

――If the wireless router is set to Hidden (Invisible), you have to select Add Network and enter the

 

correct Network Name and Security Key to establish the connection.

4

If the Enter security key. screen appears, go to step 5. If you select a wireless router that does not

 

have security, go to step 7.

5

If the router has security, enter the Security Key (Security Key or PIN).

6

When done, use the right arrow button to move the cursor to Next, and then press E. The network

 

connection screen appears and the verification process starts.

7

Select Stop while network connections are being attempted. This will stop the connection.

8

Select IP Settings on network connection screen. The IP Settings screen appears.

9

Select the field at the top, press E, and then set IP Settings to Enter manually. Repeat the entry

 

process for each field in the IP Address.

――Setting IP Settings to Enter manually automatically changes DNS setting to Enter manually.

10 When done, select OK at the bottom of the page, and then press E. The network test screen appears and the verification process starts.

11 When the connection has been verified, the “Your wireless network and Internet connection are setup and ready to use.” message appears.

WPS(PBC)

How to set up using WPS(PBC)

If your router has a WPS(PBC) button, follow these steps.

1

Go to Network Settings screen.

2

Select WPS(PBC), press E, and then press Eagain.

3

Press the WPS(PBC) button on your router within 2 minutes. Your product automatically acquires all

 

the network setting values it needs and connects to your network.

4

The network connection screen appears, and network setup is done.

114