![](/images/new-backgrounds/1273825/27382595x1.webp)
Korištenje softvera
Specification
1.Each value should be gradually set in "Delay Touch Settings" after fulfillment of "Enable Delay Touch". "Delay" is set to 40 and "Area" to 16.
2.Enter count : It means how many times you click to approach the setting value within 3 seconds. Then driver will install the function of "False touch rejection" where quick click or scratch will be considered void except the touch point on the active area for quite a while.
3.Leave count : "False touch rejection" is no longer effective when the click times within 5 seconds is less than the setting number.
47