Introduction

[PC] → [DVI] → [AV] → [Component] → [HDMI] → [MagicInfo]

Note

•The BNC mode will not be activated on the DXN-2 model.

•MagicInfo supports the DXN-2 model only.

PIP button

Push the PIP button to turn the PIP screen On / Off.

More than one PIP cannot overlap on screen as BNC and the component use the same terminal.

•PC : DVI / AV / HDMI

•BNC : DVI / AV / HDMI

•DVI / AV : PC / BNC

•Component : PC

•HDMI : PC / BNC

Power button []

Use this button for turning the LCD Display on and off.

Brightness Sensor (Optional)

Automatically detects the surrounding brightness.

Note

This function is activated only on the models equipped with an auto brightness sensor.

Power indicator

Shows PowerSaver mode by blinking green

Note

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods.

Remote Control Sensor

Aim the remote control towards this spot on the LCD Display.

Rear

Note

For detailed information concerning cable connections, refer to Connecting Cables under Setup. The LCD Display 's configuration at the back may vary slightly depending on the model.