Introduction
Rear
Note
See the "Connections" section for details about cable connections. The LCD Display's configuration at the back may vary slightly depending on the model.
POWER S/W ON [ │ ] / OFF
Switches the LCD Display On/Off.
POWER
The power cord plugs into the LCD Display and the wall outlet.
IR OUT/IN
Receives a signal from the remote control and outputs the signal through Loopout when a removable sensor board is connected.
DVI OUT (LOOPOUT)
•Connect a monitor to another monitor through a DVI, DVI to HDMI cable.
•Connect a DVI or
•HDMI and network signals sent via the [DVI OUT(LOOPOUT)] port are dis- played on the second display which has the [DVI IN] port.
Note
•The Loopout function can be used to du- plicate the screen of the primary display. Connect [DVI OUT] on the primary dis- play to [DVI IN] or [HDMI] on another display.