Connecting a VCR
Video Connection
TV Side Panel | TV Rear Panel |
VCR Rear Panel
| Unplug the cable or antenna | |
1 | ||
from the back of the TV. | ||
| Connect the cable or antenna | |
2 | ||
to the ANT IN terminal on the | ||
| back of the VCR. | |
| ||
| Connect an RF Cable between | |
3 | ||
the ANT OUT terminal on the | ||
VCR and the ANT IN terminal | ||
|
on the TV.
4 | Connect a Video Cable | |
between the VIDEO OUT jack | ||
on the VCR and the AV IN 1 | ||
| [Y/VIDEO] or AV IN 2 [VIDEO] | |
3 RF Cable (Not supplied) | jack on the TV. | |
Connect Audio Cables between | ||
5 | ||
the AUDIO OUT jacks on the | ||
VCR and the AV IN 1 (or AV IN 2) | ||
5 Audio Cable (Not supplied) | ||
|
|
|
|
|
| ➣ If you have a “mono” |
|
| 4 | Video Cable (Not supplied) | VCR, use a | |
|
|
|
|
| supplied) to hook up to the right |
|
|
|
|
| and left audio input jacks of the |
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape. | TV. If your VCR is stereo, you | ||||
must connect two cables. | |||||
➣Each VCR has a different back panel configuration.
➣When connecting a VCR, match the color of the connection terminal to the cable.
➣When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).
TV Side Panel | TV Rear Panel |
VCR Rear Panel
To begin, follow steps
1 the previous section to connect the antenna or cable to your VCR and your TV.
Connect Audio Cables between
2 the AUDIO OUT jacks on the VCR and the AV IN 2
| 3 | Connect an |
| between the | |
|
| on the VCR and the AV IN 2 |
|
| |
| An | |
1 RF Cable (Not supplied) | with a VCR. (If not, check your local | |
electronics store.) | ||
2
3
Audio Cable (Not supplied)
➣Each VCR has a different back panel configuration.
➣When connecting a VCR, match the color of the connection terminal to the cable.
English-
