Samsung LS17TRTLS/EDC, LS17TRTLSY/EDC manual

Check when	MagicTune™ feature
MagicTune™ does	is found only on PC
not function	(VGA) with Window
properly.	OS that supports
	Plug and Play.

MagicTune™	Have you changed
doesn't work	your PC or video
properly.	graphic card?

*To check whether your PC is available for MagicTune™ feature, follow the steps below (When Windows™ is XP);

Control Panel → Performance and Maintenance → System → Hardware → Device Manager → Monitors

→After deleting Plug and Play monitor, find 'Plug and Play monitor' by searching new Hardware.

MagicTune™ is an additional software for the monitor. Some graphic cards may not support your monitor. When you have a problem with the graphic card, visit our website to check the compatible graphic card list provided. http://www.samsung.com/monitor/magictune

Download the latest program. The program can be downloaded http://www.samsung.com/monitor/magictune

Visit the MagicTune™ website and download the installation software for MagicTune™ MAC.

Check the following items if there is trouble with the monitor.

Symptom	Solutions
The screen does	To use the network function, approximately 30 seconds of booting time is
not appear when I	required after turning the power on, and a blank screen appears for 3 to 4
switch to the Client	seconds during booting.
Mode.	Please switch the mode about 30 seconds after the power is turned on.
The client screen	1) Check if the Hub port LED to which the LAN cable is connected blinks. If not,
appears, but I	that indicates that the LAN connection is disconnected. In this case, connect
cannot connect to	using another LAN cable.
the server.	2) Check if the settings of the 'Settings', 'Network' tab are properly set up. The
	default setting is "DHCP". If your network uses a static IP address, select 'Use
	the following IP address' and then enter the appropriate IP address information.
	3) Check if the 'User Name' and 'Password' set in the 'Remote Desktop' tab of
	'Settings' are the same as those of the host PC. If not, match the 'User Name'
	and 'Password' of the 'Remote Desktop' with those of the host PC.
I cannot access the	1) Check if the Hub port LED to which the LAN cable is connected blinks. If not,
Internet in the	that indicates that the LAN connection is disconnected. In this case, connect
Client screen.	using another LAN cable.
	2) Check if the settings of the 'Network' tab of 'Settings' have been properly set
	up. The default setting is "DHCP". If your network uses a static IP address,
	select 'Use the following IP address' and then enter the appropriate IP address
	information.

The contents (video, voice) on the server do not play smoothly on the Client Monitor.

This is because the data is transmitted over the LAN. Check your LAN connection status.

I have connected a digital device such as a digital camera, camcorder or USB memory to the USB port, but they do not work.

This model supports USB devices that support removable disk functions without an additional driver installation. Check if the device you want to connect to is a device that supports the removable disk function without an additional driver installation.

The file list does	1)	Check the files on the card. If only abnormal files (e.g. 0KByte, broken JPEG)
not appear.	exist, the files do not appear on the screen.
	2)	The time required to display is determined by the size of the file. Wait a
	moment.