1.Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.

2-1.Using the D-sub (Analog) connector on the video card.

Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.

2-2.Using the DVI (Digital) connector on the video card.

Connect the DVI cable to the DVI port on the back of your monitor.

2-3.Connected to a Macintosh.

Connect the monitor to the Macintosh computer using the D-SUB connection cable.

2-4.In the case of an old model Macintosh, you need to connect the monitor using a special Mac adapter.

3.Turn on your computer and monitor. If your monitor displays an image, installation is complete.