Adjusting the Monitor

Direct Functions

Note

•The monitor LED displays for 10 seconds

•Press the MENU button four times continuously to exit OSD

AUTO

When no OSD is displayed,press”” button to perform the AUTO function,the auto adjustment screen appears as shown in the animated screen on the center.

Auto adjustment allows the monitor to self-adjust to the incoming Analog signal.

If auto adjustment does not work properly, press ““ button again to adjust picture with more accuracy.

If you change resolution in the control panel, auto function will be executed automatically.

Brightness

When no OSD is displayed,press”” button to perform the Brightness function.

OSD Functions

Brightness

 

 

 

 

 

MagicBright

Custom

NotePC

Internet

Movie

Dynamic

 

 

 

 

 

Contrast

Image Size

Auto

Wide

 

 

 

Language

 

 

 

 

 

Exit

 

 

 

 

 

Brightness

(Not available in MagicBright mode of Dynamic Contrast.)

You can use the on-screen menus to change the brightness according to personal prefer- ence.