Model SyncMaster 971P

Connecting the Monitor

1.Connect a power line to a direct current power supply and then plug it into the relevant power port.

2.Use a connection appropriate for your computer.

2-1.Using the D-Sub (analog) connector on the video card.

Connect the DVI terminal of your monitor to the D-Sub terminal of your computer using a DVI/D-Sub cable.

2-2.Connected to a Macintosh.

Connect the monitor to the Macintosh computer using the 'DVI to D-SUB' connection cable.

Turn on your computer and monitor. If your monitor displays an image, installation is complete.

If you properly connect your monitor using the DVI connector but get a blank screen, check to see if the monitor status is set to analog. In this case, turn the Power off and on so that your monitor rechecks the input signals.