Samsung LS19RTUSSZ/EDC manual Hrc, Irc, Afn, Lna

	• HRC
	• IRC
	• AFN
	STD, HRC, IRC, AFN, and Air identify various types of cable TV systems.
	Contact your local cable company to identify the type of cable system that
	exists in your particular area.
Auto	The TV automatically cycles through all of the available channels and stores
Program	them in memory. This takes about one to two minutes.
	In rare cases, "Auto program" may miss a few channels due to weak signals
	and the channels may not be added to the channel memory.
Add/Delete	Adds or deletes channels from the memory.
Fine Tune	Due to weak signals or an incorrect antenna configuration, some of the
	channels may not be tuned correctly.
LNA	Amplifies signals when antenna reception is poor. However, if incoming
	signals are interfering with each other, turn off LNA as it may malfunction.
	• On / Off

Setup

Available Mode		: PC / DVI	: TV : AV : S-Video	: Component
OSD	Description				Play/Stop
Area	When you turn the power on of the product for the first time since it released
Configuration	from a factory, menu to select location will appear.
	Choose the region and country where you use the monitor.
	This is because broadcasting type varies according to region and country.
	You can select broadcasting type in OSD menu as well by selecting MENU-
	Setup-Area Configuration.

Note : This product can be used worldwide if area configuration is set up regardless of broadcasting type.

Note : If country is not selected properly, the product may not locate