Connecting the Monitor

1.Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.

2-1.Using the D-sub (Analog) connector on the video card.

Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.

[ RGB IN ]

2-2.Using the DVI (Digital) connector on the video card.

Connect the DVI Cable to the DVI Port on the back of your Monitor.

[ DVI IN ]

2-3.Connected to a Macintosh.

Connect the monitor to the Macintosh computer using the D-sub connection cable.

2-4.In the case of an old model Macintosh, you need to connect the monitor using a special Mac adapter (Option).

3.Turn on your computer and monitor. If your monitor displays an image, installation is complete.