When installing the product on a console or shelf, make sure that the front of the product does not protrude out of the console or shelf.
•Otherwise, this may cause the product to fall off and result in a malfunction or injury.
•Make sure to use a cabinet or shelf suitable to the size of the product.
If the product is installed in a location where the operating conditions vary considerably, a serious quality problem may occur due to the surrounding environment. In this case, install the product only after consulting one of our service engineers about the matter.
•Places exposed to microscopic dust, chemicals, too high or low temperature, high humidity, such as airports or stations where the product is continuously used for a long time and so on.
When putting the product down, handle it gently.
•Otherwise, it may result in a problem with the product or injury.
Cleaning Related
Since using a surfactant, which contains a large amount of alcohol, solvent or other strong chemicals, may result in the discoloration or cracking of the product exterior or the panel surface coming off, be sure to use the recommended cleansing agent only.
You can purchase the recommended cleansing agent from a service center.
Before cleaning the product, unplug the power cord.
•Otherwise, it may result in electric shock or fire.
When cleaning the product, do not spray water directly over the product parts.
•Make sure that water does not enter the product.
•Otherwise, it may result in fire, electric shock or a problem with the product.
Caution
Avoid spraying cleansing agent directly onto the product.
•This may result in discoloration or cracking of the exterior of the product or the panel coming off.
Use a soft, damp cloth with a "monitor- exclusive cleansing agent" and wipe the product with it.
•If no
When cleaning the product, disconnect the power cord and clean the product with a soft dry cloth.
•Avoid using chemicals such as wax, benzene, alcohol, thinner, mosquito- repellent, fragrance, lubrication or cleansing agent when cleaning the product.
This may result in the exterior being deformed or the print being removed.
Since the exterior of the product is easily scratched, be sure to use a proper cleansing cloth. Use the cleansing cloth with a small amount of water. However, if the cloth is contaminated by alien substances, it may result in scratches to the exterior; therefore shake off any alien substances from the cloth before using it.
Major Safety Precautions |