6Setup and Reset
6.5Key Repeat Time
Control the response rate of a button when the button is pressed.
The functions available on the monitor may vary depending on the model. Refer to the actual product.
6.5.1 Configuring Key Repeat Time
1
2
3
Press any button on the front of the product to display the Key Guide. Next, press [MENU] to display the corresponding menu screen.
Press [ | ] to move to SETUP&RESET and press [ | ] on the product. |
Press [ | ] to move to Key Repeat Time and press [ | ] on the product. |
The following screen will appear.
SETUP&RESET |
| |
Reset All |
| |
Smart Eco Saving | Off | |
Off Timer Plus | Acceleration | |
PC/AV Mode | ||
1 sec | ||
Key Repeat Time | ||
Acceleration | ||
Source Detection | 2 sec | |
Auto | ||
| No Repeat |
Configure the response rate of a button when the button is pressed.
AUTO
4
5
zAcceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed.
Press [ ] to move to the option you want and press [].
The selected option will be applied.
6 Setup and Reset 88