6Setup and Reset
6.6Key Repeat Time
Control the response rate of a button when the button is pressed.
6.6.1 Configuring Key Repeat Time
1When the Function Key Guide appears, select [] by moving the JOG button UP. Next, press the JOG button.
2Move to SETUP&RESET controlling the JOG button UP/DOWN and press the JOG button.
3Move to Key Repeat Time controlling the JOG button UP/DOWN and press the JOG button. The following screen will appear.
SETUP&RESET |
|
|
|
|
| |
Reset |
|
|
|
|
| |
Eco Saving |
|
| ||||
Off Timer |
|
| ||||
Turn Off After |
|
| 4 | |||
|
| |||||
PC/AV Mode |
|
|
|
|
| |
Key Repeat Time | Acceleration |
|
| |||
Source Detection | 1 sec |
|
| |||
Manual |
|
| ||||
|
| 2 sec |
|
| ||
|
| No Repeat |
|
| ||
Return | Move | Enter | ||||
|
|
|
|
|
|
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
6 Setup and Reset 68