1Preparations
Icons | Description |
|
|
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Use this button to control the brightness and contrast of the screen.
When OSD is not on the screen,push the button to adjust the Volume in Analog / DVI mode if a stereo cable is connected to the [IN] port.
Applicable to the models that have speakers only.
Confirm a menu selection.
Pressing the [
] button when the OSD menu is not displayed will change the input source (Analog / DVI). If you power on the product or
change the input source by pressing the [
] button, a message that shows the changed input source will appear at the top left corner of the screen.
Press the [AUTO] button to automatically adjust the screen settings.
Changing the resolution in Display Properties will activate the
AUTO
Auto Adjustment function.
This function is only available in Analog mode.
Turn the screen on or off.
When a control button on the product is pressed, the Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)
Key Guide To access the onscreen menu when the guide is displayed, press the corresponding button again.
The Key Guide may vary depending on the function or product model.
Refer to the actual product.
1 Preparations 21